U-FLY-ITAEROLITE 103 FACTORY
Scenic Mountain Peaks & Sky Horizon
Action on the Mountain Trail Ridge

THE PUREST
FREEDOM IN
THE AIR.

Discover the world's bestselling FAA Part 103 legal ultralight. Fly legally with zero pilot license, zero medical exam, and zero registration required. Assembled in 30–40 hours.

YOUR TRUSTED FACTORY FOR
PART 103 ULTRALIGHTS & SPORT AIRCRAFT

DELAND MUNICIPAL AIRPORT • KDED

Flight Heritage
Measurable Results

DC
JM
RB
Trusted by 1,000+ Pilots Worldwide
Years at DeLand25+
Aircraft Flying1,000+
Championship Titles04
Grand Champion Light SportChallenger II CWS • Sun 'n Fun Expo
Best in Type: UltralightQuicksilver Sport 2S • Sun 'n Fun Expo
EAA AirVenture FeaturedCross-Country Flight • Oshkosh, WI
FAA Part 103 Standard254 lbs Legal Standard • KDED Factory

Different Missions. A Higher Standard.

Proven ultralights for training, adventure, and a cleaner tomorrow.

SIMPLE FLIGHT.BRIGHTER SKIES.
Complete Fleet Lineup (6 Models)

Looking for Full Technical Specs, Engine Options & Pricing?

Compare all 6 aircraft models side-by-side, check FAR Part 103 compliance, and view turnkey vs quick-build kits.

Explore All 6 Aircraft Models

Clear Regulations.
The Right Airframe.

Whether you want the legal freedom of zero pilot license or the cross-country utility of two seats, here is exactly how the rules compare.

REGULATORY GUIDEFAA TITLE 14 CFR
Aerolite 103 solo flight at Oshkosh
ZERO LICENSE REQUIRED
FAA 14 CFR PART 103 • SOLO AVIATION

Aerolite 103 Series

Single-Place

Fly legally across the United States with zero pilot license, zero medical exam, and zero FAA registration. Designed for pure stick-and-rudder aviation at the lowest operating cost.

PILOT LICENSENone Needed
EMPTY WEIGHT≤ 254 lbs
OPERATING COST~$10 / hr
Quicksilver Sport 2S two-place flight
2-PLACE CROSS-COUNTRY
FAA EXPERIMENTAL AMATEUR-BUILT (E-AB)

Challenger II & Quicksilver

Two-Place

Take passengers flying, provide flight training, and cruise 500+ miles cross-country. Registered with a standard FAA N-number and flown with a Sport Pilot or Private Pilot license.

PILOT LICENSESport / PPL
SEATING2 Seats (Dual)
MAX RANGE500+ Miles

Looking for the full technical breakdown?

Review the complete 10-point FAA 14 CFR comparison table, legal weight thresholds, and operating cost analysis.

View Full Regulatory Guide

Unsure which airframe matches your runway, weight, and local airspace?

Talk directly with Dennis Carley at the DeLand factory • Hangar 4, DeLand Municipal Airport (KDED)

Call (386) 738-4444

Simple Assembly.
Aircraft-Grade Precision.

No welding, no toxic fabric doping, and no specialized machinery. Every Aerolite 103 arrives 100% pre-drilled for fast assembly in a standard two-car garage.

QUICK-BUILD ENGINEERING30–40 HOURS ASSEMBLY
Aero Orange & Royal Blue - Factory Flagship Livery
FACTORY BESTSELLER

Aero Orange & Royal Blue

Factory Flagship Livery • MZ 201 (45 HP) / Rotax 447

3.9 oz UV-Stabilized Dacron
FACTORY LIVERY & COLOR PREVIEW

Choose Your Scheme

Select a proven factory colorway or order custom Dacron envelope panels tailored to your personal aesthetic.

100% PRE-DRILLED GUARANTEE

All structural 6061-T6 aluminum tubes, gusset plates, and wing ribs are pre-drilled at our DeLand factory. No jigging or welding required.

PILLAR 01 • AIRFRAME

CNC Pre-Drilled 6061-T6 Tubing

Factory-drilled structural tubes and pre-riveted wing ribs eliminate alignment jigs and measuring errors. If the cleco pins slide in, your airframe geometry is true.

Zero welding or tube cutting
PILLAR 02 • COVERING

Pre-Sewn Dacron Envelopes

UV-stabilized 3.9 oz Dacron sailcloth envelopes slip directly over wing ribs and lace tight in hours. No toxic chemical dope, no spray booths, and no hazardous fumes.

Zero toxic dope or rib stitching
PILLAR 03 • RIGGING

Turnkey Hardware & Cables

Every swaged 7x19 stainless steel aircraft cable is pre-tensioned to factory lengths. Complete AN-spec aircraft hardware packages are bagged and labeled step-by-step.

Pre-swaged stainless rigging cables
TWO PATHS TO FIRST FLIGHT

Build in Your Garage, or at Our DeLand Factory

Dennis Carley Factory Support

Option A: Home Garage Build

Assembles in 30–40 hours using standard hand tools. Fits easily inside a normal two-car garage.

  • Complete step-by-step video assembly guide
  • Standard tools: cleco pliers, pop-riveter, wrenches
  • Direct phone support with Dennis Carley whenever you need it
Shipped in heavy-duty wooden crates worldwide

Option B: DeLand Factory Assist

Fly into DeLand Municipal Airport (KDED), Florida. Spend 3–4 days inside our 10,000 sq ft hangar and build with factory supervision.

  • 100% master alignment jigs and pneumatic tooling provided
  • Side-by-side assembly coaching with Dennis Carley
  • Chief test flight and pre-delivery inspection before transport
KDED Airport Hangar 4Reserve Hangar Slot

Purpose-Built Upgrades.
Factory Engineered.

Tested on our own aircraft at DeLand Municipal Airport. High-efficiency aerodynamics, lockable luggage, and whole-airframe safety systems shipped worldwide.

FACTORY STORE & UPGRADESWORLDWIDE CRATE SHIPPING
Universal Streamline Cargo Pods (Pair)
FACTORY BESTSELLER
$350

Universal Streamline Cargo Pods (Pair)

Aerodynamic lockable luggage pods engineered to eliminate parasite drag while adding weatherproof cross-country cargo capacity. Fits Aerolite, Challenger, Quicksilver, and Kolb.

WEIGHT2 lbs 4 oz
CAPACITY1,000+ cu in
COMPATIBILITY90% Ultralights
3:1 Streamline Aluminum Strut Fairings
+5 TO 8 MPH BOOST
From $120

3:1 Streamline Aluminum Strut Fairings

Converts blunt round lift struts and gear legs into high-efficiency teardrop airfoils. Reduces parasite drag significantly for increased cruise speed and lowered fuel burn.

ASPECT RATIO3:1 Foil Profile
CRUISE GAIN+5 to 8 mph
INSTALLATIONSlip-On Match
Molded Streamline Wheel Pants (Set)
CLEAN AIRFLOW
$295

Molded Streamline Wheel Pants (Set)

High-strength fiberglass wheel pants custom contoured for ultralight and light sport aircraft wheels. Encloses tire and axle assemblies to smooth turbulent wake.

CONFIGURATION3-Piece Tricycle
FINISHWhite Gel-Coat
MOUNTINGAxle-Lock Brackets
Magnum Whole-Airframe Parachute Systems
LIFE-SAVING RESCUE
Factory Direct

Magnum Whole-Airframe Parachute Systems

Solid-propellant rocket-deployed emergency recovery parachute. Lowers entire aircraft and pilot safely in extreme structural or mid-air emergency. Eligible for FAA Part 103 weight allowance.

DEPLOYMENTSolid Rocket
RECOVERYWhole Aircraft
FAA CREDIT+24 lbs Weight

Need replacement parts, AN hardware bags, or custom strut lengths?

Direct phone orders with Dennis Carley • Worldwide domestic and international crate shipping

Call (386) 738-4444
“They that wait upon the Lord shall renew their strength; they shall mount up with wings as eagles; they shall run, and not be weary; and they shall walk, and not faint.”
ISAIAH 40:31•U-FLY-IT Heritage Since 1999

Built by Aviators.
Flown Across 20+ Countries.

Real flight logs, garage build times, and ownership reviews from active Aerolite and Challenger pilots.

VERIFIED FIELD REPORTS1,000+ AIRCRAFT FLYING
Verified Owner120+ Hours

“Hands-off trim on maiden flight”

Built my Aerolite in 36 hours in my two-car garage over three weekends. The pre-drilled aluminum tubes aligned perfectly. First flight required zero trim adjustment at 55 mph. Direct fuel cost is under $10 an hour.

Mark Sullivan36 Hours build
Clearwater, Minnesota
Aerolite 103 (MZ 201)
Verified Owner240+ Hours

“Unmatched direct factory support”

Dennis answered my phone call personally on a Saturday morning when I had a question on the landing gear torque. You don't get that kind of direct factory support from big manufacturers. Over 240 flight hours now without missing a beat.

Dave Kincaid32 Hours build
Georgetown, Texas
Aerolite 103 Flagship
Verified Owner410+ Hours

“Pure stick-and-rudder aviation”

After 30 years flying commercial widebodies, the Challenger II gave me back the joy of pure stick-and-rudder flying. Flew it to Sun 'n Fun twice. Remarkable low-speed stability and very docile stall characteristics.

Capt. Robert Miller (Ret.)Factory Assist build
Ocala, Florida
Challenger II CWS (2-Place)
Verified Owner85+ Hours

“Seamless worldwide crate delivery”

The wooden crate arrived in Quebec with every AN bolt, bracket, and pre-sewn Dacron sail envelope clearly numbered. Assembly was straightforward with standard tools. Operates flawlessly off my 400-foot grass strip.

Jean-Luc Moreau38 Hours build
Quebec, Canada
Aerolite 103 Quick-Build

Frequently Answered.
Factory Clarified.

Straightforward answers on runway requirements, garage storage, fuel, and builder support.

PILOT FAQ & ADVISORYESSENTIAL BUYER ANSWERS

The Aerolite 103 takes off in just 100 to 150 feet of ground roll on smooth grass or turf (landing roll under 150 ft with mechanical drum brakes). While many pilots operate from municipal airports, hundreds of owners fly directly from private farms, pastures, or local ultralight airparks with standard airspace clearance.

Have a specific question regarding engine selection or pilot weight?

Speak directly with Dennis Carley at the DeLand KDED factory.

Call (386) 738-4444
KDED • 29°04′01″N 081°17′02″W • ELEV 79 FT

Experience the Purest Flight.
Reserve Your 2026 Build Slot.

Whether you are ready to assemble an Aerolite 103 in your home garage, build with Dennis in our 10,000 sq ft DeLand hangar, or fly in for a demonstration flight, our factory team is ready.

RUNWAY ACCESS6,000 ft & 4,300 ft
MANUFACTURING10,000 Sq Ft Hangar
CRATE SHIPMENTWorldwide Crated
DeLand Municipal Airport (KDED), Hangar 4, DeLand, FL 32724